Porosity Check

This check is performed with a porosity meter on the leading edge of the glider.

Mimimum requirement is 60 seconds porosity.

As your glider becomes more porous it becomes less safe due to air passing through the material therefore the glider will become less stable, more prone to colapse, slower to reinflation from colapse.

Riser Check

Risers checked and o rings replaced where required.

Line Check

Lines checked for kinks, unevenness, fraying, sheath integrity. Attachment points checked using 20kg electronic device.

Cloth check

Cloth checked for wear, holes, rip test performed.