Made 100% in Italy
Reduced width of the helmet
The advantage of a reduced width of the helmet are evident: less weight and less resistance to te air.
The disadvantage: if there is only one dimension of the shell like in this helmet, the maximum size is XL (61 cm of head circumference).
The 3 mm thickness polycarbonate shell has the advantage to be very light but still very strong.
The polystyrene inside is reinforced with one more layer of polycarbonate to achieve the hard penetration test of the E.N. 966 certification.
Airflow inside the helmet
Between the shell and the polystyrene there are 2 channels with their holes for the air flow.
You can open or close the entrance of the air into the helmet just with one hand and while you are flying.
3 sizes available, each with an adjustable sizing wheel, for head circumferences from 53 to 61 cm:
S (53-56 cm = XS-S)
M (57-59 cm = M-L)
L (60-61 cm = L-XL)
The size of a helmet is always described by the inner circumference of the internal padding.
The size number therefore corresponds to the head circumference in centimetres.
3 internal paddings are adapted to the 3 sizes determined by the wheel regulator situated in the back of the helmet. They can be replaced by larger or smaller padding pieces included the wheel regulator, thus varying the helmet size.
You just choose your own size of ICARO tailored inner helmet lining for a safe, perfectly comfortable head fit. It can be changed in moments in case a different size is needed.
If the helmet is not a perfect fit, Icaro will send a new padding free of charge, independently from where you bought the helmet.
The important advantage: you can easily remove the padding and replace it with a new one or just wash it.
We found a method to stich a strip of fabric around the helmet shell edge. The result is beautiful!
Sidepieces and chin strap
Plastic-coated stainless steel wire sidepieces and micrometric chin strap.
Certification E.N. 966
All Icaro helmets are designed and built especially for freeflight and microlight pilots, in accordance with the European standards (EN 966). They are as light as possible whilst still optimizing safety for Paramotor, microlight pilots.
Helmet: approx. 550 gr
Available in Short and Long versions, Transparent or Tinted Brown or Mirror.
Fully specified Bluetooth stereo paramotor headset (*Bluetooth Optional extra). Designed to be fastened to a CE marked safety helmet. No other manufacture has all these features. User can configure to work with any radio using hidden user settings.
Stereo Music, Mobile Telephone, Stereo Audio Out, Second Radio, Remote PTT, Tandem intercom.
Optional Bluetooth electronics for telephone connectivity, for telephone calls and music. The headset has ‘Side Tone’. Side tone enables the user to hear their own voice whilst transmitting; this eliminates the need to shout and transmits a clear audio transmission. Two headsets can be linked together for tandem use, using the optional tandem intercom lead.
Soft gel Ear Seals.
Auxiliary Locking bayonet plug.
High specification waterproof noise cancelling mic.
Volume dial on headset.
Padded headband for more comfort.
PTT on left earcup.
User configurable for any radio
Electronic noise filtering circuit
Comfortable to wear – headset does not squeeze your head.
Flexible boom mic with large sponge wind muff.
Twin skinned ear defenders that cut out more ambient noise, up to 3 times quieter than other headsets.
Stereo Music Lead
Stereo Audio Out lead
Mobile Telephone Lead
Second Radio Lead
Remote PTT Lead
Tandem Intercom lead